This Hycote Red Engine Enamel Gloss Spray Paint 400ml is designed to enhance the appearance of automotive engines and to provide protection against corrosion.
Furthermore – Use primarily for use on engine blocks and cylinder heads.
In addition – Surface preparation: For best results, ensure surface is clean, dry & free from loose paint, mould & mildew, wax or oil. If wax has been used, clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist.
Also – You can apply this to a multitude of other surfaces such as Metal, Wood, Plastic and even Glass with the correct preparation.
Finally – This range also contains an Extreme Heat Clear Lacquer to enhance gloss levels, and to improve environmental and physical protection.
Hycote Part Number (MPN) – XUK998
✓ One step application, products are self priming
✓ Excellent heat resistance
✓ Extreme durability and toughness
✓ Resistant to petrol oils and greases
✓ Enhanced covering power
✓ Surface finish – Gloss
Click for a larger image
Click for a larger image
Hycote has been providing car paint and maintenance products for thirty years. We try and bring you our expertise and knowledge about looking after your vehicle so you don’t have to worry when using our products.
You have the assurance all Hycote products are the highest quality and will help you in your task, whether it is a small repair or a large project.
Looking for specific vehicle colour selector Spray Paint? –
✓ Hycote Double Acrylics are available in tonnes of colours
✓ 150ml carries the same amount of paint as a 300ml pack
✓ Easy and convenient to use
✓ Can be used on plastics, metals and even ceramics
✓ Full range of basics and primers also available
✓ Available in a 150ml pack size
✓ Find them all here
For an even better finish – Rapide Spray Paint Trigger
✓ Ergonomic design for greater spray comfort and maximum control
✓ Designed for Rapide aerosols and will easily fit most aerosol spray paint cans including 151 brand
✓ Simple and easy to fit
✓ Makes spraying easier and more comfortable to aid a perfect finish too
✓ Just £1.99. Use again and again
Aerosol Tips & Safety
You will get the best performance from your aerosol cans if stored at room temperature prior to use. Cold cans are more prone to an obstructive flow of the paint, plus it can take longer for the ingredients (including the propellant) to circulate and merge efficiently.
Shake cans thoroughly – hold the can horizontally, rather than vertically while shaking is the manufacturer’s advice.
Sometimes aerosols can experience a blockage. Mixing the ingredients by vigorously shaking the can for at least 10 seconds before use is paramount to helping stop splatter and the clogging of nozzles.
Many more tips and information on the cans. Always make sure you read and understand them before you begin spraying to optimise your safety and results.
Always Be Careful
Aerosols if used incorrectly can be dangerous.
Please always be sure to thoroughly read all instructions and information on the cans themselves. The instructions and information are written by the manufacturer (not by us, the seller).
If you have any concerns about your product(s) and cannot locate the necessary help, please contact the manufacturer of the product for the most accurate advice.
We (the seller) do not manufacture these products, nor do we have any input into the way the products operate. We are simply stockists.
Since spray painting comes with certain words and phrases that you may not fully understand, we have created this Terminology Guide that can assist you.
If you have a question about this product, please get in touch and let us help you.