Osmo – Wood Meets Colour
Wood and colour from one source. You can rely on wood and finishes from Osmo thanks to in-depth expertise in both areas. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience.
Osmo Door Oil Clear Satin 1L
Osmo Satin Door Oil is ideal for protecting your interior wood doors. The unique combination of natural oils and waxes will make your interior wood extremely resistant to dirt, water, and abrasion in only 2 coats. Formulated to resist household products including wine, beer, coffee, and tea. It has an easy application with no need for primers or sanding between coats makes it the ideal product for your doors. 3060 enhances the natural look of the wood.
- Won’t flake, blister, crack or peel.
- No primer needed.
- Enhances the wood’s natural character.
- Suitable for children’s toys.
Performance
- Recommended use – Interior wooden doors, frames & Joinery.
- Coverage – Up to 24m² per litre.
- Recommended 2 coats.
- Drying time – 24 hours.
- Re-coat time – 6 hours.
Surface Preparation
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Door-Oil is ready to use. Do not thin. Shake well before use. For solid doors, clean old microporous stains thoroughly.
Old paints,varnishes and lacquers must be completely removed. If renovating veneered doors, always check with the door manufacture that renovation is possible. Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding P120-150 for solid wood doors.
Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. If possible, please apply the first coat to all sides before installation.
Application
Always test a small area of the surface to be treated to ensure you are happy with the finished colour.
- Shake the product well, to avoid inconsistent colour.
- Osmo Door oil is ready to use and does not need to be thinned.
- Apply with either a brush or roller.
- Apply a thin and even coat along the wood grain and spread well.
- Always give good ventilation when drying.
- Applying the product too generously and insufficient ventilation lead to delays in drying time.
- Apply second coat after 24 hours.
Note: Always follow the manufacturer instructions found on the tin.
Recoating
Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible. To refresh the sheen on Osmo Door Oil clear satin, use clear Osmo Liquid Wax Cleaner.