Osmo Polyx Oil Effect Raw Transparent 750ml

£32.57

Mainland UK orders Next Working Day delivery.
Delivers weekdays & Saturdays. £2.95. 4pm cut-off.
Want free Next Working Day delivery?
Spend £24 and get automatically upgraded. 4pm cut-off. Includes Saturday delivery.

Osmo – Wood Meets Colour

Wood and colour from one source. You can rely on wood and finishes from Osmo thanks to in-depth expertise in both areas. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience.

Osmo Polyx Oil Effect Raw Transparent 750ml

Osmo Polyx Oil is a nearly invisible wood finish ideal for use on interior wooden floors and furniture. One of Osmo most popular products the original hard wax oil is stain resistant, water repellent and abrasion-resistant. The use of natural oils and waxes protects your interior wood without cracking, peeling or flaking whilst allowing the light character of the wood to remain. Along with the easy application and no need for primer this really is the go-to product for wooden floors and furniture.

  • Light coloured wood stays light coloured.
  • Nearly invisible appearance, no ‘permanent wet effect.
  • Does not crack, peel or flake.
  • Resistant to household spillages e.g. juice, tea and wine.
  • Enhances the wood’s natural character.

Performance

  • Recommended use – Interior wooden floors and furniture.
  • Coverage – Up to 30m² per litre.
  • Recommended 1-2 coats.
  • Drying time – 24 hours.
  • Re-coat time – 8-10 hours.

Surface Preparation

Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.

Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).

Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white.

The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Application

Always test a small area of the surface to be treated before application to ensure you are happy with the finished look.

  • Stir well before use.
  • Osmo Polyx Oil is ready to use and does not require thinning.
  • Use a soft tip flat brush, floor brush or microfibre roller.
  • Apply thinly working in the direction of the wood grain and spread well.
  • Applying excess product may lead to a white chalky surface.
  • Allow to dry for 24 hours under good ventilation.
  • After drying quickly apply a second coat, thinly.
  • If re-coating one coat should be sufficient.

Note: Always follow the manufacturer’s instructions found on the tin.

Recoating

When signs of wear become visible on the surface re-apply one coat of Osmo Polyx Oil to a cleaned and dried surface.

Available in 750ml & 2.5L
Weight 1000 g
Colour

EAN

Size

Brand

MPN

Finish

Shopping Basket