STEP 1. Move the rocking chair to a well-ventilated area and place on top of newspaper or a dust sheet. Mask off any areas not to be painted (if you want a contrasting colour effect). Protect the surrounding area with additional dust sheets or newspaper.
STEP 2. Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease by lightly abrading the surface with a light sandpaper (this will provide a key for the paint to latch onto), followed by a damp cloth to remove any remaining dust.
STEP 3. Depending on the style of the chair, bare wood and metal should be primed with Rust-Oleum Surface Primer and bare plastic should be primed with Rust-Oleum Plastic Primer. Layer up two coats of primer, leaving at least four hours in between coats to ensure it’s thoroughly dry. However when using Rust-Oleum Universal All-Surface Spray Paint no primer is necessary.
STEP 4. Using your selected Universal shade hold the can approximately 30cm from the surface of the chair and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
STEP 5. Leave to dry in a well ventilated place for 24 hours.