Remove the glass and back of the frame. Sand the frame lightly and clean with a damp cloth. Cover the area where you are painting with newspaper and ensure it is well-ventilated.
Always follow the instructions on the back of the can. For a better finish, apply a light coat of Rust-Oleum Surface Primer and leave to dry before applying the top coat.
Apply your chosen colour (or colours) of Rust-Oleum Painter’s Touch in multiple light coats to avoid any paint runs. Two or three light coats will be enough using a continual back and forth motion.
Leave the frames to dry for 24 hours, then replace the glass, insert your photograph and re-fit the back of the frame.