Easy French Polish
• Easy to use French polish that produces
great results quickly
• Ideal for beginners to furniture restoration
• Suitable for use on small surfaces
• Available in clear for a natural effect
Product use
Liberon Easy French Polish is ideal for use on furniture, carved woodwork and artefacts in rare or exotic
woods. Easy French Polish Clear will beautifully enhance the wood’s natural finish.
Preparation
Ensure the surface is clean and bare, removing any wax finishes with Liberon Wax and Polish Remover and
any varnish with Liberon Fine Wood Stripper. Sand with extra fine abrasive paper and remove any dust with
a tack cloth.
Application
Using a good quality brush or cloth apply a thin coat of Liberon Easy French Polish. Work with the grain of the
wood and avoid overlapping between strokes. Allow a drying time of 3 to 4 hours between coats. Gently rub
down the dried coat using extra fine abrasive paper or Ultra Fine (0000) Steel Wool for a smooth surface. Use
a tack cloth to remove any dust.
Apply as many coats as necessary, following the same instructions. Three to four coats are usually sufficient to
achieve a quality finish.
Important: Always test product first on a spare surface or inconspicuous area for colour, compatibility and end
result.
Liberon Advice
• Best results are on small to medium sizes pieces as the product dries quickly. We recommend practicing
on small pieces before applying to a larger surface.
• Use a good quality flat lacquer brush and check for loose bristles as they can spoil the finish.
• Always work with the grain of the wood when applying Easy French Polish or when sanding the surface.
• For a higher gloss finish use Liberon Burnishing Cream once the last coat has hardened for at least 7 days.
• French Polishes are best applied in a warm dust-free environment.
Colours
Clear
Packaging
Easy French Polish is available in 250 ml and 500 ml containers.