Check out this short video on how different Bollom Fire Resistant products can help you. Click here for more Bollom paints.
[vc_video link=”https://vimeo.com/259662100″ el_aspect=”235″ align=”center”]
Here are some quick points for Bollom Intulac Ultra Top Coat Varnish 4 Timber Fire Resistant Paint Clear Satin –
- General information –
- Class 0 fire rating when applied over Bollom Intulac™ Ultra Intumescent Base Coat.
- Simple 3 coat system to achieve Class 0
- Single pack products so no mixing required.
- For all hard and soft woods and most wood derivatives.
- Ideal for communal areas.
- Protects and highlights the natural beauty of wood.
- Can be used over previously varnished surfaces (with sound adhesion).
- Easy to apply, single-pack system (no mixing necessary).
- Application information –
- Coverage 25m² per litre.
- Touch dry – 1.5 hours.
- Hard dry – 6 days .
- Slightly milky clear finish.
This Bollom Intulac Ultra Top Coat Varnish 4 Timber Fire Resistant Paint Clear Satin is applied over Bollom Intulac™ Ultra Varnish Base Coat to provide a Class 0 fire rated protective / decorative varnish system for interior wood. It is easy to apply and ideal for use in communal areas.
The Bollom Intulac™ Ultra varnish system provides a high performance fire protection coating system for interior wood surfaces. It comprises a clear, transparent, water-based intumescent base coat – designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood – and a clear, transparent, solvent-based protective top coat (also available in Matt finish).
It dramatically reduces the ignitability of soft and hard woods and other wood derivatives including plywood, chipboard, fibre insulation board, hard board and veneer (less than or equal to 12mm thick).
It also insulates against heat, inhibits spread of flame and diminishes flue gas density and flue gas temperature.
Bollom Intulac™ Ultra Protective Top Coat must be applied over Bollom Intulac™ Ultra Intumescent Base Coat.
Drying time: At approx. +20oC temperature and 60% relative humidity: through dry after 6 hours. Only apply Bollom Intulac Ultra Protective Top Coat over Bollom Intulac Ultra Base Coat after approx. 48 hours.
All Data & Specification sheets can be found on the official Bollom website.
Since painting comes with certain words and phrases that you may not fully understand, we have created this Terminology Guide that can assist you.
If you have a question about this product, please get in touch and let us help you.