Product Description
COMPO-CLEAN is a composite wood cleaner that quickly and easily removes all types of dirt (grease, stains, moss, pollution…). Ready to use, COMPO-CLEAN works straight from the bottle, simply apply, scrub and rinse with water. Can be used on vertical and horizontal surfaces – cladding, decking…
Properties
- Waterbased – Environmentally friendly.
- Removes surface and ground in dirt.
- Fast acting – From 5 minutes depending on the condition of the surface being cleaned.
- Gel formula – Does not run. Easy to apply.
- Does not contain solvents or paraffin. Will not attack plastic pool liners, stone, glass…
Surface Preparation
- Always test a small area first.
- Protect all areas not to be cleaned, plants, shrubs etc. including and especially aluminium parts.
- Wear suitable protection – gloves (rubber/nitrile), goggles or visor, clothing.
Application
- Apply a thick layer of COMPO-CLEAN to the area to be cleaned. Large areas, should be cleaned in smaller sections.
- Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination).
- Scrub with a synthetic brush.
- Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars).
- If required repeat above procedure – difficult/stubborn staining.
- Allow surface to dry 2/3 good drying days before applying chosen finish.
Technical Data
- Colour: Yellow-orange
- Solvent type: Water
- Specific gravity at 20°C (68°F): 1.04 ± 0.05.
- Viscosity: Semi-fluid gel
- PH: 12.00
- Flash point: Not classified as flammable
- Container size: 1L
- Shelf life: 1 year in original unopened container
- VOC : <1g/L
Coverage: | 5-10m2 per litre |
Tools: | Brush, roller (hose or pressure washer to rinse) |
Suitable for: | Exterior use |
Clean up: | Water |
Working Time: | 5 minutes |
Suitable Surfaces: | All exterior composite wood surfaces |