Owatrol Dilunett,Paint Remover, Stripper, Up to 8 Coats In One Application

£30.99£175.49

Mainland UK orders Next Working Day delivery.
Delivers weekdays & Saturdays. £2.95. 4pm cut-off.
Want free Next Working Day delivery?
Spend £24 and get automatically upgraded. 4pm cut-off. Includes Saturday delivery.

Product Description

DILUNETT® is a powerful, water washable solvent free paint stripper that will remove any oil and alkyd based paint, varnish or wood stain. Requiring no supervision or immediate removal of the softened coating, DILUNETT® strips up to 8 coats of finish in one application. Suitable for virtually any surface including wood, metal, plastic and GRP, DILUNETT®’s gel consistency means it will not run, making it ideal for vertical surfaces and elaborate plaster or wood designs needing to be stripped. Easy to apply, DILUNETT® dissolves paint in the smallest recess and on the finest detail, softening all accumulated layers for simple, clean removal. VOC free and non flammable, DILUNETT® is safe to use in poorly ventilated or confined areas.

Properties

  • Solvent free – No toxic fumes.
  • Easily removed with water.
  • DILUNETT® is safe on all surfaces except aluminium.
  • Does not harm plastic. Safe on gelcoat.
  • Removes up to 8 coats of paint in one operation.
  • Does not evaporate – Long active work time.
  • Easy to apply. Gel – Does not run.

Surface Preparation

  • Remove any loose and flaking paint.
  • Brush off any physical surface contamination e.g. moss, general dirt etc.

Application

  • Apply a thick coat of DILUNETT® over the whole surface to be stripped. For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood.
  • Allow product to work.
  • Remove DILUNETT® and dissolved paint with a stiff scrubbing brush or paint scraper while flushing with water, alternatively use a pressure washer (max 60bars / 870psi).

Note: The use of hot water makes the job easier.

  • Thoroughly rinse surface with fresh clean water.
  • After stripping and rinsing. All porous (Wood, Stone, Brick….) surfaces must immediately be treated with NET-TROL®* while still wet to neutralise the surface and restore the woods colour.

Note: Consult us for additional information and advice prior to using DILUNETT® on Oak and Chestnut.

Technical Data

  • Biodegradability: Easily Biodegradable. Certificate Number: OECD 301 F.
  • Viscosity: Gel.
  • Specific Gravity at 20°C (68°F): 1.10 ± 0.05.
  • Physical State: Viscous liquid.
  • Flammability: Not classed as flammable.
  • Shelf Life: 18 months in original unopened container.
  • Container Size: 500ml, 1L, 2.5L, 10L.
  • Appearance & Odour: Creamy, caustic soda smell.
  • Average working times:- Alkyd/Oil paint, stains and varnishes: 1 coat = 5-15 mins, 2 coats = 10-30 mins, 3 coats = 15-45 mins- Acrylic paint, stains and varnishes: Test on a small area to determine working time.
  • Note: The above are average working times only. A test should be carried out to determine the actual contact time required to remove the requisite number of coats.
  • VOC: Out of scope.

Restrictions

  • DILUNETT® will not remove the following types of coatings 2 pack or baked on paints. Polyurethane paint and varnish.
  • Do not use on “weak” woods such as veneers.
  • Do not use on aluminium.
Coverage: 4m2 per litre
Tools: Flat blade, synthetic brush, power washer
Suitable for: Exterior use
Clean up: Water
Working Time Alkyd/Oil-based: 1 coat: 5-15 mins,m 2 coats: 10-30 mins, 3 coats: 15-45 mins
Working Time Acrylic: Test on a small area to determine working time
Suitable Surfaces: All surfaces except aluminium (safe on gelcoat)
Weight N/A
Shopping Basket