Beeswax Paste
• Traditional wax that nourishes wood
• Feeds wood and protects against dryness
• Gives an authentic finish
• Ideal for small surfaces and furniture
• Suitable for hard and softwoods
• EN71 Part 3 Approved – Safe for toys
• Approved by the Guild of Master Craftsmen
Product use
Liberon Beeswax Paste is ideal for nourishing absorbent woods such as pine and oak, especially unsealed. It
naturally protects wood and guards against dryness. It is particularly suitable for small surfaces and furniture.
Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean,
dry and free from dust.
Application
Apply a coat of Liberon Beeswax Paste sparingly with a soft, lint-free cotton cloth or Liberon Ultra Fine Steel
Wool (0000). Allow to dry for a minimum of 1 hour – longer if possible, then buff with a clean cotton cloth or
Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats.
For a higher sheen build-up with thin coats of Beeswax, buffing between coats. Buff with a Liberon
Furniture Brush or Drill Brush once the last coat has completely dried.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end
results.
Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash
with water.
Precautions
 Not suitable for high water areas such as kitchens and bathrooms.
Colours: Clear, Dark and Antique Pine.
Packaging
Liberon Beeswax Paste is available in 150 ml, 500 ml and 5 L containers.