Liberon Wax Polish Black Bison (paste) Medium Oak 1L

Wax Polish Black Bison

• Gives good resistance to finger and water marks

• Ideal for small surfaces

• Feeds, polishes and helps prevent wood drying out

• Highly lustrous and hard wearing

• Helps cover marks and scratches

• EN7I Part 3 Approved – Safe for toys

• Approved by the Guild of Master Craftsmen

• Silicone Free

Product use

Liberon Wax Polish Black Bison is ideal for nourishing and protecting all types of wood, including lacquers and French polishes. Black Bison is well known for its quality and distinctive, pleasant smell. It is traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural beauty of wood whilst protecting it against dryness.

Preparation

Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary.

Application

Apply Wax Polish Black Bison sparingly with a cloth on a delicate / French polished surface or with Ultra Fine steel wool (Liberon grade 0000) when a deeper penetration is required.

Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush.

Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish, buff with the Liberon Furniture Brush once the last coat has dried.

For a higher sheen build-up with thin coats of wax, buffing between coats.

Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance

Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.

Colours: Antique Pine, Clear, Dark Oak, Georgian Mahogany, Golden Pine, Maple, Medium Mahogany, Medium Oak, Neutral, Stripped Pine, Tudor Oak, Teak, Victorian Mahogany, Walnut and Yew.

Packaging

Wax Polish Black Bison is available in 150 ml, 500 ml and 5 L containers.