Product Description
NET-TROL® is a powerful cleaner and brightener which restores grey, weather-beaten exterior wood that is unfinished to its natural colour. Unlike bleach or chlorine based cleaners it will not damage the wood fibres. NET-TROL® removes surface and ground in dirt while restoring a bright, vibrant look to the exterior surface.
Properties
- Lightens and restores colour to all greyed weathered wood without bleaching.
- Fast acting, restores greyed weathered wood to its natural colour within 20 minutes.
- Use on all wood species: Softwood (inc. Pressure Treated Wood) – Larch, Pine, Cedar…; Ultra Heat Treated Wood; Hardwoods – Teak, Iroko, Ipe, Bangkirai (Balau), Oak, Chestnut…
- Cleans and neutralises staining caused by tannins.
- Excellent degreaser for tropical hardwoods prior to applying the chosen finish.
- Removes all traces of weathering attributed to mould, mildew, pollution…
- Restores lustre to plastics dulled by weathering and UV rays.
- Removes rust stains.
- Cleans discoloured stone and stained cement.
- Neutralises surfaces stripped with AQUANETT®*, PREPDECK®* or DILUNETT®*.
- Safe to use – harmless to plants and shrubs.
- Biodegradable – Does not contain solvents or bleach.
Application
- Shake or stir container well before use.
- Use neat or diluted. See “Dilutions” below.
- Work large areas in zones.
- Always work in the direction of the grain. Do Not use a wire brush.
Wood, Stone, Concrete
- Wet surface with fresh, clean water.
- Apply NET-TROL®.
- Scrub surface to agitate the NET-TROL®.
- Leave to stand for approx. 10-20 minutes. If surface starts to dry, dampen with a mist application of water.
- Scrub surface while flushing with water or use a pressure washer (max. 60 bar/870 psi).
- Rinse thoroughly with fresh clean water.
- If required repeat procedure.
- Wood – Allow to dry 2-3 days or until it meets the moisture content required by the chosen finish.
- Stone & Concrete – Allow to dry until it meets the moisture content required by the chosen finish.
Nail Stains
- Clean surface. After cleaning wet surface with fresh clean water.
- Apply NET-TROL® to the entire surface over and around the nail stain.
- Rinse with fresh clean water but not until the stain has disappeared.
Plastic or GRP
- Wet surface with fresh clean water.
- Apply NET-TROL®.
- Leave to work for 10 minutes.
- Scrub surface with a soft or medium scrubbing brush.
- Rinse with large amounts of fresh clean water.
Rust Stains
- Wet surface with fresh clean water.
- Apply NET-TROL® with a stiff scrubbing brush working in to rust stain.
- Leave to work for 10 minutes.
- Re-scrub surface with a stiff scrubbing brush.
- Rinse with large amounts of fresh clean water.
Neutralising
- Apply NET-TROL® to the wet surface.
- Wood – Allow to work until wood has brightened but for at least 15 minutes.
- Other Porous Surfaces (Stone, Concrete….) – Allow to work for at least 15 minutes.
- Thoroughly rinse off with fresh clean water.
Technical Data
- Biodegradability: Easily Biodegradable. Certificate Number: OECD 301 F.
- Solvent Type: Water.
- Specific Gravity at 20°C (68°F): 1,07 ± 0,05.
- Physical State: Gel.
- Flammability: Not classified as flammable.
- Shelf Life: 18 months in original unopened packaging.
- Container Size: 1L, 2.5L, 15L.
- Appearance and Odour: Blue, fresh soap odour.
- VOC: Out of scope.
Restrictions
Do not use on Aluminium
Coverage: | 5-10m2 per litre |
Tools: | Soft brush, stiff bristle/nylon brush, powerwasher |
Suitable for: | Exterior use |
Clean up: | Soap and water |
Working Time: | 10-20 mins |
Suitable Surfaces: | All exterior wood surfaces, cement, stone, plastic, GRP |