Osmo Decking-Oil Bangkirai 2.5L

£67.99

Next day delivery available on this product.
Pay before 16:00 today for same day dispatch.
Spend £24+ for free next day delivery.

Buy now and get 10% off your next order.

Next Day delivery to UK mainland.
On all orders. £2.95. 4pm cut-off.
Delivered anywhere, every day.

Osmo – Wood Meets Colour

Wood and colour from one source. You can rely on wood and finishes from Osmo thanks to in-depth expertise in both areas. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience.

Osmo Decking-Oil Bangkirai 2.5L

Osmo Decking Oil is a premium grade oil for decking that nourishes, protects, and enhances the appearance of all softwood, and hardwood decking.

Ideal for timber decking Osmo Decking Oils are the perfect solution for the garden offering a natural and protective finish. Osmo Decking Oils are individually tailored to the natural nuances of the colour and properties of each wood. They give the timber a fresh, natural appearance and a smooth finish.

This is a premium grade, solvent-based oil. It provides excellent weather and dirt resistance and Contains UV filters to protect the colour for longer.

Osmo Decking Oil enhances the natural character of the wood helping to prevent cracking, splitting and warping. It does not peel, flake or Blister and dries to a smooth satin finish.

Performance

  • Recommended use – Exterior wooden decking and furniture.
  • Coverage – 24m²/L with one coat.
  • Recommended 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430.
  • Drying time – 12 hours.
  • Application tool – Osmo Decking Brush 150.

Surface Preparation

Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).

Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency.

Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%).

Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.

Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding.

If possible, and if the wood is absorbent please apply the first coat to all sides before installation.

The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation.

Application

Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain.

For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing.

Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying.

Once dry apply the second coat – also thinly.

If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Colours Available – 004 Douglas Fir, 005 Bankirai, 007 Teak (clear), 009 Larch, 010 Thermowood, 013 Garapa, 014 Massaranduba, 016 Bankirai, 021 Bog Oak all in 750ml or 2.5L tins.

Additional information

Weight 3200 g
Brand

Range

Colour

Finish

Size

EAN

MPN

Want free Next Day delivery?
Spend £24 and pay no postage.
Order before 4pm for same-day dispatch.