Osmo – Wood Meets Colour
Wood and colour from one source. You can rely on wood and finishes from Osmo thanks to in-depth expertise in both areas. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience.
Osmo Stone and Terracotta Oil Exterior Clear 750ml
This is a unique oil combination Protecting against dirt and abrasion. It offers a highly water repellent microporous, breathable finish which does not crack, peel, flake or blister
Ideal for terracotta, granite, limestone and slate.
For many there is nothing that can beat the richness and texture of natural products like; granite, limestone, slate or features crafted from terracotta.
Whether these are used for external tiles or paving, wall cladding, windowsills or decorative pots; as natural products, they need protection to prevent staining, and to be repel water and dirt.
The new Osmo Stone and Terracotta Oil Exterior Clear for exterior surfaces will do just this.
Performance
- Recommended use – Exterior stone, terracotta, patio and paving surfaces.
- Coverage – 32m²/L with one coat.
- Recommended 2 coats.
- Drying time – 8-10 hours.
Surface Preparation
The surface must be asorbent, clean, dry and frost free.
Osmo Stone and Terracotta Oil is ready to use; do not thin. Stir well.
Application
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly and spread well. Remove any excess product (pooling or streaking) with a pad or a lint-free cloth. For larger areas, remove excess oil with a rubber scraper and polish with a buffing machine (white pad). Important: the liquid oil must be absorbed into the surface. There must not be any oil left on the surface.
Allow to dry for 8-10 hours. Ventilate well while drying. Apply the second coat also very thinly. Again, remove any excess. When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.
Care
Regular Cleaning – Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.
Occasional Maintenance – If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Recoating – Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Available in 750ml or 2.5L tin.