Osmo – Wood Meets Colour
Wood and colour from one source. You can rely on wood and finishes from Osmo thanks to in-depth expertise in both areas. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience.
Osmo Teak-Oil Spray Clear Satin 400ml
Clear, water and dirt-repelling oil to protect and maintain garden furniture and decking. Osmo Teak-Oil Spray penetrates deeply into the wood surfaces, re-gulates thereby moisture and prevents swelling and shrinkage.
The microporous oil coating will not crack, peel or flake. To refresh, simply reapply (No sanding –no dust!).
Performance
- Recommended use – Interior & exterior wooden decking and furniture.
- Coverage – 25m²/L with one coat.
- Recommended 2 coats.
- Drying time – 12 hours.
- Recoat – One coat, when signs of wear become visible.
Recommended Use
Osmo Teak-Oil Spray protects, maintains and improves the appearance of garden furniture made of Teak and other hardwoods – in covered outdoor are-as. It is also well-suited for the clear treatment of garden furniture and other similarly used surfaces.
Surface Preparation
Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo Teak-Oil Spray is ready to use. Shake spray can well and carry out trial spray. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Hardwoods with an especially high content of natural wood extractives need to weather off (for approx. 4 weeks) or be degreased with Osmo Brush Cleaner and Thinner.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Application
Spraying distance approx. 25 cm. Afterwards rub in with a brush. While applying, cover and protect surrounding areas and parts that should not be treated against the spray mist. Wipe away any excess with a cloth.
Allow to dry for approx. 12 hours under good ventilation and apply a second coat. When renovating, one coat applied is usually sufficient.
Clean spray nozzle after use with Osmo Brush Cleaner and Thinner.