Overview
B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer that combines fast drying times with unrivalled
adhesion and best possible coverage.
This is a groundbreaking, 4-in-1 primer, that offers the same trusted performance advantages as our renowned B-I-N® and more.
Highlights
Suitable for a wide range of interior and exterior applications
Permanently blocks odours.
Unparalleled adhesion to any surface without sanding.
Adheres to slick surfaces like tile, glossy paints and varnishes.
Low odour.
Matt Finish.
Clean up with soap and water.
Application Information
Coverage: 12.5m² per Litre
Touch dry: 20 minutes
Recoatable: 45 Minutes
VOC Level – 1 g/l
Recommended Use
Priming Interiors-
Use as a full-surface primer on wood panels, building boards, doors,
frames, PVC, plywood, concrete, glossy paint and varnish and other paintable surfaces.
Spot-Priming –
B-I-N® Aqua is excellent for exterior spot priming of knots, resin, rust
stains etc. B-I-N® Aqua is also ideal for interior spot priming of water stains and puttied
surfaces. Note that the primer on spot-primed areas with a porous surface may show
through if the topcoat has bad coverage. This also applies to many ceiling paints and shiny
enamels – only use a topcoat with good coverage.
Sealing –
B-I-N® Aqua penetrates and seals porous surfaces and dries to a smooth finish
with excellent hiding properties. The paint gets better coverage and a more uniform shine,
which makes B-I-N® Aqua an excellent primer for enamel. Ideal for wood, new cured plaster,
concrete and concrete block, stucco, drywall, joint compound, uncoated wallcovering, and
other porous surfaces.
Stain & Odour Blocking –
B-I-N® Aqua will effectively block stains from water, nicotine,
grease, oil, soot, rust, mildew, tannin, crayon and lipstick. B-I-N® Aqua is also an
outstanding odour barrier and blocks all kinds of odour, including odour from fire damage,
smoke, cigars & cigarettes, mildew, pet urine, odour from fireplaces and heaters.
Fire Damage –
Replace severely charred substrates and remove loose soot and other
contaminants with dry chemical sponge or duster. Prime damaged surfaces with B-I-N®
Aqua to block smoke stains, water stains, and seal odours.
Knots & Sap Streaks –
Seal knots and resin with one or two coats of B-I-N® Aqua. If the
wood is new, two coats are recommended.
Glossy Surfaces –
Glossy enamel paint and clear finishes, cabinets, panelling, glass,
Formica®, MDF, ceramic tile and metal can be primed without sanding or deglossing.