Product Description
DECKING PAINT is a premium finish for new wood and for recoating old applications. DECKING PAINT is fortified with OWATROL® E-B* to provide unsurpassed adhesion to vertical and horizontal exterior substrates where other products ultimately fail or require extensive preparation and priming.
Properties
- Excellent adhesion and flexibility of the film.
- Delivers high traffic performance on deck surfaces and perfect choice for long-lasting beauty on siding.
- Protects against moisture damage.
- Warranty against peeling or blistering (see limited warranty details).
- Available in wide range of colours + 3 bases for tinting.
Surface Preparation
New wood surfaces
- Surfaces must be clean, dry and free of dirt, grease, grime and mildew.
- After cleaning, allow wood to dry 48 hours or until it has reached a moisture content of 19% or less before finishing.
- New wood often has a hard shiny surface known as mill glaze that prevents maximum penetration; this and the moisture content of new wood prevents the proper adhesion of any coating.
- Initially, apply a coat of SEASONITE®*, and allow wood to weather a minimum 6 months.
- After 6 months apply DECKING PAINT.
Weathered wood surfaces
- Uncoated wood surfaces that have weathered longer than six months require thorough cleaning before applying a finish. Use NET-TROL®* (according to label instructions), along with a pressure washer or stiff bristle brush to remove the loose fibre, dirt and other surface contaminants.
- If necessary sand the wood (100 grit).
- Surfaces must be free of dirt, grease, grime, mildew and previous coatings.
- After cleaning, allow wood to dry 48 hours or until it has reached a moisture content of 19% or less before finishing.
Previously coated surfaces
- Sand or scrape to remove all loose flaking or peeling finish. If necessary strip with DILUNETT®* and neutralise with NET-TROL®*.
- Surfaces must be free of dirt, grease, grime, mildew and previous coatings.
- After cleaning, allow wood to dry 48 hours or until it has reached a moisture content of 19% or less before finishing.
Note: Cedar, Redwood and Hardwoods may darken with DILUNETT®*. If this occurs brighten with NET-TROL®* before proceeding. On Oak and Chestnut, manually or mechanically sand the wood, dust off and wash with NET-TROL®* to clean.
Application
- Apply a coat of DECKING PAINT avoiding heavy application.
- Allow to dry 3-4 hours.
- Apply a second coat.
- When applying by spray, always back-brush or back-roll immediately after application to ensure uniformity of colour, coverage and penetration.
Technical Data
- Finish: Matt
- Vehicle type: Alkyd, Acrylic blend
- Solvent type: Water
- Specific gravity:
- Viscosity:
- Flammability: N/A
- Solid content:
- Flash point: > 82°C
- Shelf life: 1 year minimum in original unopened packaging
- Container size: 1 l, 2.5 l, 20 l
- Colour: available in ready mix-colours (see colour card) and in 3 tint bases
- Dry time:- To recoat: 3-4 hours, depending on temperature and humidity- To use (sit or walk on): 24-48 hours, depending on temperature and humidity
- VOC: UE limit value for this product (cat. A/e) 130 g/l (2010). This product contains max. 129 g/l.
Coverage: | 8-10m2 per litre |
Tools: | Brush, Roller, Airless Sprayer |
Suitable for: | Exterior use |
Clean up: | Soap & water |
Drying Time: | 24-48hours |
Re-coating Time: | 3-4 hours |
Suitable Surfaces: | New or weathered softwood & hardwood |
Reviews
There are no reviews yet.