Product Description
DEKS OLJE® D.2 is a varnish like, tough, flexible and durable finish that enhances the natural beauty of the wood. Easy to maintain and apply the more coats of DEKS OLJE® D.2 applied the higher the gloss finish. Unlike traditional varnishes DEKS OLJE® D.2 will not craze or blister and because of DEKS OLJE® D.1*’s penetrating qualities will not peel or flake as water is unable to get in to the wood.
Properties
- Flexible film that does not craze, peel or flake.
- High gloss finish.
- Highly transparent varnish – enhances the natural beauty of the wood.
- Long term protection.
- No sanding between coats.
- Easy maintenance.
- Easy repair, no stripping.
Surface Preparation
General Directions
- Surfaces must be clean, dry and free of dirt, grease, grime and mildew.
- Treat mildew with a 50/50 bleach/water solution. Scrub solution on to the surface and allow to stand for 10-15 minutes; rinse thoroughly.
- DEKS OLJE® D.2 may only be applied to surfaces previously finished with DEKS OLJE® D.2 or DEKS OLJE® D.1*.
- All other finishes must be completely and thoroughly removed.
New wood
- All new wood must be treated with DEKS OLJE® D.1*.
Weathered wood surfaces (untreated)
- Refer to the Technical Data Sheet for DEKS OLJE® D.1*
Previously oiled and coated surfaces (Paint, Stain, Varnish….)
- Refer to the Technical Data Sheet for DEKS OLJE® D.1*
- Weathered wood previously treated with DEKS OLJE® D.1*:
- Clean with NET-TROL®* and restore DEKS OLJE® D.1* before applying DEKS OLJE® D.2.
- Wood already treated with DEKS OLJE® D.2
Application
- DO NOT THIN. USE AS IS.
- Apply 6 coats of DEKS OLJE® D.2 allowing a minimum of 12 hours between coats.
- All coats should be applied within 1 month.
- Sanding between coats is not required.
- For an extra high gloss finish, sand between the last 2 coats with 600 grit paper.
- Allow 3 days for DEKS OLJE® D.2 to set-up and dry, before putting the boat in service.
Technical Data
- Finish: Gloss
- Vehicle type: Alkyd-Urethane Resins
- Solvent type: Solvent
- Viscosity: Semi-Fluid
- Specific gravity: 0,910 ± 0,05 (20°C)
- Physical state: Liquid
- Solid content: 56% ± 5
- Flash point: > 60°C
- Shelf life: 2 years in original unopened packaging
- Container size: 1L, 2.5L, 20L
- Colour: Amber
- Dry time: 12-24 hours per coat, depending on temperature and humidity.
- Setting up time before use: 3 days
- VOC: EU limit value for this product (cat. A/e) 400 g/L (2010). This product contains max. 399 g/L.
Restrictions
- DEKS OLJE® D.2 should only be applied to surfaces treated with DEKS OLJE® D.1* or previously finished with DEKS OLJE® D.2.
- Do not apply DEKS OLJE® D.2 in wet weather or late in the day when dew or fog may be expected.
- This may dull a newly set film causing it to blush – exposure to sunlight usually removes the discoloration.
- DEKS OLJE® D.2 is very slippery, especially when wet and we therefore do not recommend the use of it on decks and other areas where it will be walked on.
Coverage: | 15m2 per litre |
Tools: | Brush, Roller, |
Suitable for: | Exterior & Interior use (above the waterline) |
Clean up: | White Spirit |
Drying Time: | 12-24 hours per coat depending on temperature & humidity |
Re-coating Time: | 12 hours (apply all coats within 1 week) |
Suitable Surfaces: | New & weathered softwoods & hardwoods |