Product Description
PRIMALL is fast drying primer for the blocking of unknown stains and the priming of difficult surfaces.
Properties
- Adheres to smooth surfaces – No need to sand.
- Blocks and hides staining – Water, Fire and Smoke damage, Nicotine, Food (Ketchup, Mayonnaise, Mustard…), Pencil, Felt Pen….
- Prevents staining of the finish coat.
- Stabilises porous surfaces – Prevents shadowing on the finish coat.
- Apply to very lightly rusted surfaces as an anti-corrosion primer.
- Improves performance of the finish. Makes applying the finish easier.
- May be over coated with any finish – See Restrictions
Surface Preparation
- Surfaces must be clean, dry, and free of all dust, grease, oil, wax, excessive chalky material and other surface contamination, which may affect adhesion.
- Remove all loose and flaking material back to a sound surface by sanding and scraping.
- Feather in any sharp edges.
- Wash surface with SOAPCLEAN* or other suitable cleaning agent, NOT washing-up detergent.
- Treat and remove any mould with a suitable mould killer.
- Remove as much of the stain as possible by washing, sanding scraping etc.
Application
- Use as is. Do not dilute.
- Stir well before and during use
- Aerosol Can: Shake can vigorously until agitator ball is heard, thereafter shake for a further 2 to 3 minutes.
- Periodically shake during application.
- Apply 1 or 2 coats of PRIMALL depending on the condition of the surface and the severity of the stain.
- Note: PRIMALL may be used as a finish coat inside only – 2 coats Mandatory.
Technical Data
- Vehicle Type: Acrylic Resins
- Solvent Type: White Spirit
- Specific Gravity: At 25°C (77°F) 1.2-1.25 ±0.05
- Viscosity: 17-20cP
- Solid Content by Weight: 60-65% ±2%
- Solid Content by Volume: 39% ±2%
- Shelf Life: 1 year minimum in original unopened packaging
- VOC: EU limit value for this product (cat A/h): 750g/l (2010). This product contains max 400g/l.
- Application Tools: Brush, Roller, Spray: Airless or HVLP (Adjust the material accordingly – Max 10%)
- Dilution: Use as is. Do not dilute.
- Coverage: 10m2 (107ft2) per litre per coat. Actual coverage will vary depending on application method, type, texture, age and porosity of the surface.
- Drying Times: At 20°C (68°F) and 65% RH. Dry: 1 Hour / Recoat: Porous Surfaces 1 hour, Non-porous Surfaces 2 hours
Restrictions
When used externally PRIMALL must be over coated with a suitable finish.GraffitiIf the graffiti crosses-over/shows through PRIMALL then it may only be over-coated with a water-based product. If PRIMALL blocks the graffiti entirely then it may be over-coated with a water or oil-based product. PRIMALL is not compatible with 2 pack finishes.
Coverage: | 10m2 per litre per coat |
Tools: | Brush, Roller, Airless Sprayer |
Suitable for: | Interior use (exterior if sheltered by roofing) |
Clean up: | White Spirit |
Drying Time: | 1 hour |
Re-coating Time: | Porous surfaces; 1 hour | Non-porous; 2 hours |
Suitable Surfaces: | Porous & non-porous interior surfaces |